#Bixolon srp 350pg drivers for mac trial
#Bixolon srp 350pg drivers for mac password
#Bixolon srp 350pg drivers for mac Pc

I know SOMETHING has to be causing this but I am at a loss for a cause. I've asked RTS if there could be a connection there, but they say no. At the same time, we downloaded and installed the newest version of RTS. It all started when we got the new concession computer. And, I have a spare printer cable that I've switched in a time or two, it doesn't cure the problem. The same problem has surfaced in both printers periodically and I've moved the cables/adapters back and forth. The other has a similar (older) adapter, connected to a standard parallel printer cable (not directly to the printer). The one printer is connected via a brand new cable which is a USB-to-parallel adapter. When installing the cables, don't leave them in a bundle tie-wrapped behind the machine or wadded up into a ball - unroll them completely and try to insure that you have no right-angle bends in them. If you're having intermittent problems with both printers, I would replace the cables on both with new cables and see what happens. Short of chucking the entire system and getting a whole new one, I don't know what to do. I'm sure we'll be right in the middle of ticket sales tonight and one or the other will quit. I truly don't know what I did to get it to work last night, but at this moment everything is working. Sometimes they'll quit during a shift other times they'll be working when we close, and then the next night one will not be working. The boxoffice setup seems to be a little more reliable, but either one will stop working, for no reason. We thought we were out of the woods, but now the problem keeps recurring in both printers, intermittently, with no apparent cause.

I spent about 2 hours on the phone with RTS trying various things, nothing worked, until they asked me to swap printers and then.voila, they BOTH worked. When we put the new computer into the concession stand about 3 weeks ago, the printer refused to work in there at first. The boxoffice one had been the most reliable, until this most recent incident.

The bottom line is, BOTH of these printers are working erratically. I swappped the cables too, but the problem stayed in the same spot. You can order cables from for very very little, it's worth having a few on hand just to swap out.

#Bixolon srp 350pg drivers for mac Pc

It's also common for them to work well enough to transfer device-IDs and allow the PC to recognize the device, but not sustain the data transfer necessary to print. Between wear and tear, cheap manufacturing, etc, they can be marginal but work for years until they just. That is a surprisingly-accurate representation of my mood this evening!Д¬ables are often overlooked but are as often as not the source of problems. I'm sure it will perform perfectly until right before we start selling tickets tomorrow. But during RTS' 'recovery' from the cable-caused crash, the receipt suddenly printed, so I rebooted and now it's working fine after about a dozen trials. Swapped the USB adapter cable, the problem moved to the other computer, so it looks like the cable is the culprit. Swapped the printers, problem stayed with the same computer - so that ruled the printer out.

#Bixolon srp 350pg drivers for mac trial

I just unplugged and swapped things around and did some trial runs. I goofed around with things and got everything to working.ДЄlong with refusing to print, the printer would cause RTS to crash - the only way out was to exit and restart RTS. Not yet, I ran out of time and had to get back over here (day job). Have you tried it on a different computer? The computer is a fairly new Dell running Win7, and the printer is plugged in via one of those parallel-to-USB adaptor cables. It quit when I called in to have RTS change-over our credit card processing to a different vendor - the printer wouldn't print when we did a test transaction.ДЄnyone else had trouble with these and is there a little known solution? What's weird is, it was working yesterday just fine. The print jobs show up in the print queue. The printer will print its own self-test page, so I know it CAN print, but nothing from the computer. I spent two hours today on the phone with the RTS tech guy - we uninstalled, reinstalled, unplugged, shut down, restarted, changed drivers, changed the USB port, and virtually everything else under the sun and nothing works. One of them just decided to stop printing suddenly. We have two of the Samsung (Bixolon) SRP-350 printers. Topic: Problems with Samsung SRP-350 printers Problems with Samsung SRP-350 printers ()

#Bixolon srp 350pg drivers for mac password

My profile | my password | search | faq & rules | forum home Home Products Store Forum Warehouse Contact Us Film-Tech Forum ARCHIVE: Problems with Samsung SRP-350 printers